Видео

This is the best AI generated Solidworks Maker Tutorial I have run across on RUclips.

💌

Just Subscibed. Thank you for the video. FreeCAD maybe free ... but the time to put in to learn ....wooooah !! Thays why such videos are highly appeciated

I have absolutely no idea what I just watched. I learned nothing. Thank you.

So what if I want to go the opposite? Lower the face?

You say you want a revolution, we-e-el..

@10:18 I had to remove vertical constraint to make if work because of redundancy. I suppose you have a setting to remove "old" redundancy constraint. I didn't finish, but thanks for this tutorial, which is quick and straight to the point. Is that a generated voice ? :D

Perfect, thank you.

Làm sau mở nó lên được a của e nó bị ẩn đi rồi

this video is amazing the most friendly introduction to the program and straight to the point, like and subscribe

Very clear and to the point tutorial, just what I was looking for, THANKS

In the first example, the end panels had 1 tab on one side, and 2 tabs on the other for some reason, but not when he added the divider. It's also not realistic to have the same number of tabs on short edges as on longer edges. It would be nice to see an example with a different number of tabs on different edges.

This tutorial was super good. Please keep them coming.

I want to make a custom cylindrical battery holder. How would you do it in a honeycomb or offset pattern? Could you upload a video like that? I'm afraid you can only do it line by line like that...

fta

watched again about trim edge. very useful! now i know this action!

Your lessons are very clear, but at 5:36 ...very easily just grab...., it's abacadabra for me. I did try it for about an hour, but no reslults.

Long time no see, thanks for the tutorials.

this worked for me. i was looking to mirror to backside of my part and could not figure out how

The original problem occured as a feature of sweep. A single profile being swept takes into account it's angle to the sweep path. The path was not 90 degrees to the sweep path, thus, requiring adding a profile on the mating plane at the end of the sweep as demonstrated. If the sweep path began and ended at an angle perpendiculer to the beginning and end point base, a single feature to sweep would work.

thanks, followed all and it made sense

Great video. Learned a lot. But got to say... that AI Voice is so arrogant sounding :)

Hi there, it´s there any tutorial of how to modify the postprocessor?

like your proper way to make constrains...lot of people just drawing by dimensions.

Thank you, this presentation is excellent. We would like to have more of your presentations on using Freecad for woodworking designs and sheet metal designs.

Doesn't seem to work for sketches that are attached to padded objects.

I tried this and FreCad REFUSES to update the body after I have made a change to the sketch

Might be my version .21.2 but the instructions around the 5 minute mark do not work for me. The line will constrain to the center but do not pop in until I try to move one of the circles. The circles turn a different color, do not stay white. Then the following step selecting the centers of the circles and setting horizontal distance give an error "Datum 25.00 mm for the constraint with index 7 is invalid. Cannot continue from there. Since there's an error there, the pocked diappears the object and cannot complete. I tried setting the circles 25mm apart before symetric constraint but that failed also.

Best tutorial man, keep it up!

Why does the lines disappear and reappear as i zoom in and out with my scroll wheel

This is a quality tutorial. I learned a lot very quickly. That said, the sincerity of the narration “It is acceptable. We can do this” was absolutely the greatest thing ever.

"Watch this BEFORE you start learning FreeCAD" You are way toooooo late. I found some other great tutorials and no way am I am paying big bucks for a cad program I seldom use. FreeCad works for me.

whats the 1st half of it got to do with the Title???????

No audio?

seems very blurry, no volume?

Nice and Neat, thanks for the clear and easy explanations

Have been following along on your course on udemy; happy to see you here with more and love your teaching style!

beautiful.

thanks for this. saved my life.

Perfect. Thank you

Perfect

Perfect. Your tutorials are the best.

Thank you. Nicely explained.

Thank you for a good video, nicely explained.

very good

Is it possible to get the part as one homogeneous solid as in Catia?

why use an AI voice ? It's horrendous

How much is 1 by 1 ?

Hi, well explained, overlapping the 3D model is the key concept in Part Design workbench. That's why most of the beginners using FreeCAD find dead alleys in their projects. Cheers

After 4 months of using FreeCAD I never knew you could scale like that ..... thanks!